NAV6 PSU Converter

PowerVerter 24Vdc to 12Vdc Voltage Converter

The PowerVerter Voltage converter offers a convenient way to operate mass produced 12Vdc equipment such as cell phones, in car entertainment, professional communication and telematics equipment, refrigerators, televisions etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels.

This unit can be used to power the NAV6 NAVTEX systems on your vessel.

NAV6 PSU Converter

PowerVerter 24Vdc to 12Vdc Voltage Converter Features

A list of features for the PSU Converter are listed below:

  • Ideal for small vehicles such as marine craft.
  • The PowerVerter have been optimised for high volume 24Vdc to 12Vdc applications.
  • Click ‘n’ fit’ mounting clip which is fixed in three points allowing it to be mounted on uneven surfaces.
  • No ventilation holes to permit stray objects, dust or water droplets to enter the case.
  • Green LED indicates when there is output from the converter.
  • No external fuses.
  • Enclosed in a rugged aluminium extrusion.
  • Vibration and shock proof.

Technical Specification

ICS Part Number ICS.500.10
Manufacturer Alphatronix
Model PV24s
Load Current 
Continuous/Intermittent
24V / 30A
Isolation Non-Isolated Common Negative.
Input Voltage Range 17-32Vdc
Output Voltage 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.
Intermittent output power As stated, taken for a maximum of 2 minutes followed by 8 minutes rest.
Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles.
Electrostatic voltage protection Meets ISO10605, ISO14892, >8kV contact, 15kV discharge.
Output noise <50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25 and VDE0879-3
Off load current
(quiescent current)
<15mA
Power conversion efficiency Typically: 90% for non-isolated units, 85% for isolated units.
Isolation >400Vrms between input, output and case, on isolated products only.
Mean time between failures >162 years (HRD4)
Operating temperature -25ºC to +30ºC to meet this specification table
+30ºC to +80ºC de rate linearly to 0A
Storage temperature -25ºC to +100ºC
​Operating humidity 95% max. non-condensing
Casework Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533.
Connections Four 6.3mm push-on flat blade connectors.
Output indicator Green LED adjacent to output terminals.
Mounting method Click ‘n’ fit mounting clip, fitted separately using three hole fixing.
Safe area protection: Over current Limited by current sensing circuit.
Over heat Limited by temperature sensing circuit.
Transients Protected by filters and rugged component selection.
Catastrophic failure Protected by internal input and output fuses.
Approvals 2004/108/EC The general EMC directive
2006/96/EC The automotive directive
93/68/EEC The CE marking directive
Markings CE and e marked